As a granite assist guide, in designs where your countertop spans supports, the length of the span (side to side as your dealing with it) must be limited to 24″ for ¾” (2CM) thick stone and 36″ for 1¼” (three CM) stone thicknesses.

For designs where your countertop is cantilevered or overhangs the supports, overhanging portion should be restricted sixteen″ to 24″.

Granite assist requirements: Fragile stones may require corbels and supports which can be spaced closer together and that do not enable as much overhang than the specifications here.

Use granite countertop brackets when overhanging stone counters. Considering that granite, marble, and limestone can have overhangs weighing hundreds of pounds, and considering how brittle granite countertops can be, granite assist brackets are imperative. Quartz countertops typically do not want support.

Granite helps can be both practical, ornamental, or each relying on your granite countertop installation. And in contrast to laminate countertops that do not require supports, natural stone countertops require some thought and understanding of why and the way they will be used. It’s greatest to let an professional reminiscent of your granite fabricator determine the need. See Original Granite Bracket for professional help on hidden countertop support.

Are your granite countertop brackets sturdy sufficient? Be certain that the supports you select are made of half of” thick steel!

What dimension granite countertop assist brackets will you want?

The size of your granite help legs and brackets will be based on your overhang . For instance, in case your granite overhangs 12 inches previous your 2 x 4 knee wall, subtract 2-4″ for the desired length of your assist bracket. In this case, an eight” or 10″ deep bracket is called for.

How you can add help brackets to present countertops

You can use entrance mounting brackets to add assist for countertops which might be already installed, creating an open, floating countertop effect. When you’re coping with sheet-rock over studs on a knee wall, you are able to do the following:

* Remove the sheet-rock over the stud where the bracket will be mounted.

* Mount the bracket to the stud and be certain that the top of the bracket is level with the beneathside of the granite. The horizontal plate of the bracket must be level. If vital, shim the bracket between the vertical plate and the stud, not on the horizontal plate.

* After putting in the bracket, use a “Fast Patch” sheet-rock kit to cover the bracket.

If you have any kind of questions pertaining to where and how you can make use of Modern Shelf Brackets, you can call us at our web-site.…

Installing our metal shelf brackets and other hardware might be easier than you think. With a few instruments and a little bit preparation, open shelving is a straightforward DIY project. Many of the identical instruments and tips work for installing our different hardware like metal hooks, coat racks, towel bars, and other projects (see under for particular ideas).

Shelf Bracket Installation

As a normal rule, it’s always perfect to install shelf brackets into wall studs. Nonetheless, it may be difficult to install brackets directly on a wall stud In that case, we suggest using a toggle anchor (which are available for buy here). The set up directions are similar. *If putting in into tile, brick, or extra thick dry wall, please read below for further recommendations.

RECOMMENDED TOOLS FOR BRACKET INSTALLATION:

7/16″ Wrench or Socket

Stud Finder

Degree

Electric Drill

Pencil & Masking Tape

Lag Bolts (we include these with each bracket order but also available at your native hardware store) OR necessary bolts for specialty set up into concrete or brick installation*

Digital stud finder might be helpful

Steps:

1. Earlier than starting, affirm the bracket and shelf are the proper size and match together. Establish crucial bolts and hardware wanted for specific project. Note: in case you are using a J fashion bracket, we embody a flush mount screw for backside hole in case shelf interferes.

2. Figuring out the place you’d just like the shelf. Place a protracted piece of masking tape horizontally alongside the wall, spanning the size of your piece of wood shelf.(this also givs an excellent visible of how your cabinets will look earlier than making the dedication!)Using a stage, mark a level line along the tape.

3. Locate the studs in the wall and mark the studs alongside the extent line. (Not able to find studs? Use advisable toggle bolt anchors instead)

4. Pre-drill a three/16″ hole the place your degree line and your studs intersect (pre-drilling also helps the lag bolt go in smoothly and reduces chance of bolt head breaking)

5. Remove all masking tape from the wall.

6. Install the brackets with the offered bolts using a wrench or socket. (If utilizing J brackets, flush mount screws are included for bottom bolt gap if needed)

7. Place your wood onto the brackets. (L brackets require wood screwed directly onto bracket arm).

Installation Without Wall Studs:

When wall studs are not available, we strongly suggest utilizing toggle bolts. They’re an increaseable anchor that grips the back side of the drywall. They’re simpler to make use of than they give the impression of being! We’ve them available for purchase that match our different hardware, which is favorred if you’re mounting some brackets into studs and others with the toggle bolts. They can be found at any local hardware store. For our toggles, use a 5/eight” drill bit to pre-drill the hole.

When you have any kind of queries relating to where along with the way to work with Support Brackets, you possibly can email us on the web site.…